購物須知
結帳櫃檯
手動下單
訂單查詢
站内搜索
軟體破解
下載目錄
問題反映
常見問題
加入最愛
xyz軟體王

xyz軟體王

xyz軟體王

您現在的位置:網站首頁 >> 專業繪圖 >> 3D動畫CADCAMCAE >> 碟片詳情
iMachining 2.0.10 for Siemens PLM NX 8.5-12.0 仿真建模插件軟體 英文破解版
碟片編號:CID8781
語系版本:英文破解版
商品類型:仿真建模插件軟體
運行平台:ForWindowsXP/Vista/7
更新日期:2018-10-28
碟片數量:1片
銷售價格:200
瀏覽次數:11040

轉載TXT文檔】  
您可能感興趣
您可能也喜歡:
碟片介紹



iMachining 2.0.10 for Siemens PLM NX 8.5-12.0 仿真建模插件軟體 英文破解版 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 軟體名稱:iMachining 2.0.10 for Siemens PLM NX 8.5-12.0 仿真建模插件軟體 英文破解版 語系版本:英文破解版 光碟片數:單片裝 破解說明: 系統支援:For Windows XP/Vista/7 軟體類型:仿真建模插件軟體 硬體需求:PC 更新日期:2018-10-28 官方網站: 中文網站: 軟體簡介: 銷售價格:$80元 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 破解說明: 1. iMachining for NX 64bit Setup 1.1. Install iMachining for NX 64bit 1.2. Wait until License driver will be installed 1.3. When asked for license type select "USB Hardware key" 2. Multikey 18.1.0 64-bit Emulator Setup If you already had Multikey 18.1.0 64-bit Emulator for 2016-2017 SolidCAM/InventorCAM installed skip Emulator setup To install Multikey Emulator you need Administrator rights! 2.1. Uninstall previouse USB-emulatot for SolidCAM 64-bit if exist 2.2. Copy folder "MultiKey_18.1_x64_31052017" to your computer 2.3. Run "SolidCAM.reg" and confirm to add info into Windows Registry 2.4. Run as Administrator MultiKey_18.1_x64\install.cmd and wait until new devises and drives for them will be found and installed 2.5. Reboot computer Note: If setup is succesfull you have to see new devices: Device Manager -> Universal Serial Bus controllers -> Sentinel HASP key Device Manager -> Universal Serial Bus controllers -> Sentinel USB key Enjoy   軟體簡介:   iMachining For Siemens PLM NX是為nx用戶打造的一款實用仿真建模插件,適用 於PLM NX 8.5-12.0等版本,它為用戶提供了高效的加工解決方案,擁有智慧的刀 具路徑、智慧的工藝參數等,通過智慧的動態切削參數生成智慧的變體螺旋切削路 徑和優化的組合刀路軌跡,保證整個切削過程都能得到最優化的切削環境,新版本 還提升了性能,增強了相應的穩定性。   -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

購物清單
※您必須購物滿500元